Change Data Capture (CDC)

On this page

Warning:

CockroachDB v19.2 is no longer supported as of May 12, 2021. For more details, refer to the Release Support Policy.

Change data capture (CDC) provides efficient, distributed, row-level change feeds into a configurable sink for downstream processing such as reporting, caching, or full-text indexing. Change data capture is used for high-latency data exports from CockroachDB to a data warehouse. It is not a low-latency publish-subscribe mechanism.

What is change data capture?

While CockroachDB is an excellent system of record, it also needs to coexist with other systems. For example, you might want to keep your data mirrored in full-text indexes, analytics engines, or big data pipelines.

The main feature of CDC is the changefeed, which targets an allowlist of tables, called the "watched rows". There are two implementations of changefeeds:

Core changefeeds, which stream row-level changes to the client indefinitely until the underlying connection is closed or the changefeed is canceled.
Enterprise changefeeds, where every change to a watched row is emitted as a record in a configurable format (JSON or Avro) to a configurable sink (Kafka).

Enable rangefeeds

Changefeeds connect to a long-lived request (i.e., a rangefeed), which pushes changes as they happen. This reduces the latency of row changes, as well as reduces transaction restarts on tables being watched by a changefeed for some workloads.

Rangefeeds must be enabled for a changefeed to work. To enable the cluster setting:

> SET CLUSTER SETTING kv.rangefeed.enabled = true;

Any created changefeed will error until this setting is enabled. Note that enabling rangefeeds currently has a small performance cost (about a 5-10% increase in latencies), whether or not the rangefeed is being used in a changefeed.

The kv.closed_timestamp.target_duration cluster setting can be used with changefeeds. Resolved timestamps will always be behind by at least this setting's duration; however, decreasing the duration leads to more transaction restarts in your cluster, which can affect performance.

Ordering guarantees

In most cases, each version of a row will be emitted once. However, some infrequent conditions (e.g., node failures, network partitions) will cause them to be repeated. This gives our changefeeds an at-least-once delivery guarantee.

Once a row has been emitted with some timestamp, no previously unseen versions of that row will be emitted with a lower timestamp. That is, you will never see a new change for that row at an earlier timestamp.

For example, if you ran the following:

> CREATE TABLE foo (id INT PRIMARY KEY DEFAULT unique_rowid(), name STRING);
> CREATE CHANGEFEED FOR TABLE foo INTO 'kafka://localhost:9092' WITH UPDATED;
> INSERT INTO foo VALUES (1, 'Carl');
> UPDATE foo SET name = 'Petee' WHERE id = 1;

You'd expect the changefeed to emit:

[1] {"__crdb__": {"updated": <timestamp 1>}, "id": 1, "name": "Carl"}
[1] {"__crdb__": {"updated": <timestamp 2>}, "id": 1, "name": "Petee"}

It is also possible that the changefeed emits an out of order duplicate of an earlier value that you already saw:

[1] {"__crdb__": {"updated": <timestamp 1>}, "id": 1, "name": "Carl"}
[1] {"__crdb__": {"updated": <timestamp 2>}, "id": 1, "name": "Petee"}
[1] {"__crdb__": {"updated": <timestamp 1>}, "id": 1, "name": "Carl"}

However, you will never see an output like the following (i.e., an out of order row that you've never seen before):

[1] {"__crdb__": {"updated": <timestamp 2>}, "id": 1, "name": "Petee"}
[1] {"__crdb__": {"updated": <timestamp 1>}, "id": 1, "name": "Carl"}

If a row is modified more than once in the same transaction, only the last change will be emitted.
Rows are sharded between Kafka partitions by the row’s primary key.

The UPDATED option adds an "updated" timestamp to each emitted row. You can also use the RESOLVED option to emit periodic "resolved" timestamp messages to each Kafka partition. A "resolved" timestamp is a guarantee that no (previously unseen) rows with a lower update timestamp will be emitted on that partition.

For example:

{"__crdb__": {"updated": "1532377312562986715.0000000000"}, "id": 1, "name": "Petee H"}
{"__crdb__": {"updated": "1532377306108205142.0000000000"}, "id": 2, "name": "Carl"}
{"__crdb__": {"updated": "1532377358501715562.0000000000"}, "id": 3, "name": "Ernie"}
{"__crdb__":{"resolved":"1532379887442299001.0000000000"}}
{"__crdb__":{"resolved":"1532379888444290910.0000000000"}}
{"__crdb__":{"resolved":"1532379889448662988.0000000000"}}
...
{"__crdb__":{"resolved":"1532379922512859361.0000000000"}}
{"__crdb__": {"updated": "1532379923319195777.0000000000"}, "id": 4, "name": "Lucky"}

With duplicates removed, an individual row is emitted in the same order as the transactions that updated it. However, this is not true for updates to two different rows, even two rows in the same table.

To compare two different rows for happens-before, compare the "updated" timestamp. This works across anything in the same cluster (e.g., tables, nodes, etc.).

Resolved timestamp notifications on every Kafka partition can be used to provide strong ordering and global consistency guarantees by buffering records in between timestamp closures. Use the "resolved" timestamp to see every row that changed at a certain time.

The complexity with timestamps is necessary because CockroachDB supports transactions that can affect any part of the cluster, and it is not possible to horizontally divide the transaction log into independent changefeeds. For more information about this, read our blog post on CDC.

Avro schema changes

To ensure that the Avro schemas that CockroachDB publishes will work with the schema compatibility rules used by the Confluent schema registry, CockroachDB emits all fields in Avro as nullable unions. This ensures that Avro and Confluent consider the schemas to be both backward- and forward-compatible, since the Confluent Schema Registry has a different set of rules than Avro for schemas to be backward- and forward-compatible.

Note that the original CockroachDB column definition is also included in the schema as a doc field, so it's still possible to distinguish between a NOT NULL CockroachDB column and a NULL CockroachDB column.

Schema changes with column backfill

When schema changes with column backfill (e.g., adding a column with a default, adding a computed column, adding a NOT NULL column, dropping a column) are made to watched rows, the changefeed will emit some duplicates during the backfill. When it finishes, CockroachDB outputs all watched rows using the new schema. When using Avro, rows that have been backfilled by a schema change are always re-emitted.

For an example of a schema change with column backfill, start with the changefeed created in the example below:

[1] {"id": 1, "name": "Petee H"}
[2] {"id": 2, "name": "Carl"}
[3] {"id": 3, "name": "Ernie"}

Add a column to the watched table:

> ALTER TABLE office_dogs ADD COLUMN likes_treats BOOL DEFAULT TRUE;

The changefeed emits duplicate records 1, 2, and 3 before outputting the records using the new schema:

[1] {"id": 1, "name": "Petee H"}
[2] {"id": 2, "name": "Carl"}
[3] {"id": 3, "name": "Ernie"}
[1] {"id": 1, "name": "Petee H"}  # Duplicate
[2] {"id": 2, "name": "Carl"}     # Duplicate
[3] {"id": 3, "name": "Ernie"}    # Duplicate
[1] {"id": 1, "likes_treats": true, "name": "Petee H"}
[2] {"id": 2, "likes_treats": true, "name": "Carl"}
[3] {"id": 3, "likes_treats": true, "name": "Ernie"}

Create a changefeed (Core)

A core changefeed streams row-level changes to the client indefinitely until the underlying connection is closed or the changefeed is canceled.

To create a core changefeed:

> EXPERIMENTAL CHANGEFEED FOR name;

For more information, see CHANGEFEED FOR.

Configure a changefeed (Enterprise)

An enterprise changefeed streams row-level changes in a configurable format to a configurable sink (i.e., Kafka or a cloud storage sink). You can create, pause, resume, cancel, monitor, and debug an enterprise changefeed.

Create

To create an enterprise changefeed:

> CREATE CHANGEFEED FOR TABLE table_name, table_name2 INTO 'scheme://host:port';

For more information, see CREATE CHANGEFEED.

Pause

To pause an enterprise changefeed:

> PAUSE JOB job_id;

For more information, see PAUSE JOB.

Resume

To resume a paused enterprise changefeed:

> RESUME JOB job_id;

For more information, see RESUME JOB.

Cancel

To cancel an enterprise changefeed:

> CANCEL JOB job_id;

For more information, see CANCEL JOB.

Monitor a changefeed

Note:

Monitoring is only available for enterprise changefeeds.

Changefeed progress is exposed as a high-water timestamp that advances as the changefeed progresses. This is a guarantee that all changes before or at the timestamp have been emitted. You can monitor a changefeed:

On the Changefeed Dashboard of the Admin UI.
On the Jobs page of the Admin UI. Hover over the high-water timestamp to view the system time.

Using crdb_internal.jobs:

> SELECT * FROM crdb_internal.jobs WHERE job_id = <job_id>;

        job_id       |  job_type  |                              description                               | ... |      high_water_timestamp      | error | coordinator_id
+--------------------+------------+------------------------------------------------------------------------+ ... +--------------------------------+-------+----------------+
  383870400694353921 | CHANGEFEED | CREATE CHANGEFEED FOR TABLE office_dogs INTO 'kafka://localhost:9092' | ... | 1537279405671006870.0000000000 |       |              1
(1 row)

Setting up an alert on the changefeed.max_behind_nanos metric to track when a changefeed's high-water mark timestamp is at risk of falling behind the cluster's garbage collection window. For more information, see Monitoring and Alerting.

Note:

You can use the high-water timestamp to start a new changefeed where another ended.

Debug a changefeed

Using logs

For enterprise changefeeds, use log information to debug connection issues (i.e., kafka: client has run out of available brokers to talk to (Is your cluster reachable?)). Debug by looking for lines in the logs with [kafka-producer] in them:

I190312 18:56:53.535646 585 vendor/github.com/Shopify/sarama/client.go:123  [kafka-producer] Initializing new client
I190312 18:56:53.535714 585 vendor/github.com/Shopify/sarama/client.go:724  [kafka-producer] client/metadata fetching metadata for all topics from broker localhost:9092
I190312 18:56:53.536730 569 vendor/github.com/Shopify/sarama/broker.go:148  [kafka-producer] Connected to broker at localhost:9092 (unregistered)
I190312 18:56:53.537661 585 vendor/github.com/Shopify/sarama/client.go:500  [kafka-producer] client/brokers registered new broker #0 at 172.16.94.87:9092
I190312 18:56:53.537686 585 vendor/github.com/Shopify/sarama/client.go:170  [kafka-producer] Successfully initialized new client

Using `SHOW JOBS`

For enterprise changefeeds, you can check the status by using:

SELECT * FROM [SHOW JOBS] WHERE job_type='CHANGEFEED';

Or:

SELECT * from crdb_internal.jobs WHERE job_type='CHANGEFEED';

For more information, see SHOW JOBS.

Usage examples

Create a core changefeed

In this example, you'll set up a core changefeed for a single-node cluster.

In a terminal window, start cockroach:
```
$ cockroach start \
--insecure \
--listen-addr=localhost \
--background
```
As the root user, open the built-in SQL client:
```
$ cockroach sql \
--url="postgresql://root@127.0.0.1:26257?sslmode=disable" \
--format=csv
```
Note:

To determine how wide the columns need to be, the default table display format in cockroach sql buffers the results it receives from the server before printing them to the console. When consuming core changefeed data using cockroach sql, it's important to use a display format like csv that does not buffer its results. To set the display format, use the --format=csv flag when starting the built-in SQL client, or set the \set display_format=csv option once the SQL client is open.
Enable the kv.rangefeed.enabled cluster setting:
```
> SET CLUSTER SETTING kv.rangefeed.enabled = true;
```
Create table foo:
```
> CREATE TABLE foo (a INT PRIMARY KEY);
```
Insert a row into the table:
```
> INSERT INTO foo VALUES (0);
```

Start the core changefeed:

> EXPERIMENTAL CHANGEFEED FOR foo;

table,key,value
foo,[0],"{""after"": {""a"": 0}}"

In a new terminal, add another row:
```
$ cockroach sql --insecure -e "INSERT INTO foo VALUES (1)"
```
Back in the terminal where the core changefeed is streaming, the following output has appeared:
```
foo,[1],"{""after"": {""a"": 1}}"
```
Note that records may take a couple of seconds to display in the core changefeed.
To stop streaming the changefeed, enter CTRL+C into the terminal where the changefeed is running.
To stop cockroach, run:
```
$ cockroach quit --insecure
```

Create a core changefeed using Avro

In this example, you'll set up a core changefeed for a single-node cluster that emits Avro records. CockroachDB's Avro binary encoding convention uses the Confluent Schema Registry to store Avro schemas.

In a terminal window, start cockroach:
```
$ cockroach start --insecure --listen-addr=localhost --background
```
Download and extract the Confluent Open Source platform.
Move into the extracted confluent-<version> directory and start Confluent:
```
$ ./bin/confluent start
```
Only zookeeper, kafka, and schema-registry are needed. To troubleshoot Confluent, see their docs.
As the root user, open the built-in SQL client:
```
$ cockroach sql --url="postgresql://root@127.0.0.1:26257?sslmode=disable" --format=csv
```
Note:

To determine how wide the columns need to be, the default table display format in cockroach sql buffers the results it receives from the server before printing them to the console. When consuming core changefeed data using cockroach sql, it's important to use a display format like csv that does not buffer its results. To set the display format, use the --format=csv flag when starting the built-in SQL client, or set the \set display_format=csv option once the SQL client is open.
Enable the kv.rangefeed.enabled cluster setting:
```
> SET CLUSTER SETTING kv.rangefeed.enabled = true;
```
Create table bar:
```
> CREATE TABLE bar (a INT PRIMARY KEY);
```
Insert a row into the table:
```
> INSERT INTO bar VALUES (0);
```

Start the core changefeed:

> EXPERIMENTAL CHANGEFEED FOR bar WITH format = experimental_avro, confluent_schema_registry = 'http://localhost:8081';

table,key,value
bar,\000\000\000\000\001\002\000,\000\000\000\000\002\002\002\000

In a new terminal, add another row:
```
$ cockroach sql --insecure -e "INSERT INTO bar VALUES (1)"
```
Back in the terminal where the core changefeed is streaming, the output will appear:
```
bar,\000\000\000\000\001\002\002,\000\000\000\000\002\002\002\002
```
Note that records may take a couple of seconds to display in the core changefeed.
To stop streaming the changefeed, enter CTRL+C into the terminal where the changefeed is running.
To stop cockroach, run:
```
$ cockroach quit --insecure
```
To stop Confluent, move into the extracted confluent-<version> directory and stop Confluent:
```
$ ./bin/confluent stop
```
To terminate all Confluent processes, use:
```
$ ./bin/confluent destroy
```

Create a changefeed connected to Kafka

Note:

CREATE CHANGEFEED is an enterprise-only feature. For the core version, see the CHANGEFEED FOR example above.

In this example, you'll set up a changefeed for a single-node cluster that is connected to a Kafka sink. The changefeed will watch two tables.

If you do not already have one, request a trial enterprise license.
Use the cockroach start-single-node command to start a single-node cluster:
```
$ cockroach start-single-node --insecure --listen-addr=localhost --background
```
Download and extract the Confluent Open Source platform (which includes Kafka).
Move into the extracted confluent-<version> directory and start Confluent:
```
$ ./bin/confluent start
```
Only zookeeper and kafka are needed. To troubleshoot Confluent, see their docs.
Create two Kafka topics:
```
$ ./bin/kafka-topics \
--create \
--zookeeper localhost:2181 \
--replication-factor 1 \
--partitions 1 \
--topic office_dogs
```
```
$ ./bin/kafka-topics \
--create \
--zookeeper localhost:2181 \
--replication-factor 1 \
--partitions 1 \
--topic employees
```
Note:

You are expected to create any Kafka topics with the necessary number of replications and partitions. Topics can be created manually or Kafka brokers can be configured to automatically create topics with a default partition count and replication factor.
As the root user, open the built-in SQL client:
```
$ cockroach sql --insecure
```
Set your organization name and enterprise license key that you received via email:
```
> SET CLUSTER SETTING cluster.organization = '<organization name>';
```
```
> SET CLUSTER SETTING enterprise.license = '<secret>';
```
Enable the kv.rangefeed.enabled cluster setting:
```
> SET CLUSTER SETTING kv.rangefeed.enabled = true;
```
Create a database called cdc_demo:
```
> CREATE DATABASE cdc_demo;
```
Set the database as the default:
```
> SET DATABASE = cdc_demo;
```

Create a table and add data:

> CREATE TABLE office_dogs (
     id INT PRIMARY KEY,
     name STRING);

> INSERT INTO office_dogs VALUES
   (1, 'Petee'),
   (2, 'Carl');

> UPDATE office_dogs SET name = 'Petee H' WHERE id = 1;

Create another table and add data:

> CREATE TABLE employees (
     dog_id INT REFERENCES office_dogs (id),
     employee_name STRING);

> INSERT INTO employees VALUES
   (1, 'Lauren'),
   (2, 'Spencer');

Start the changefeed:
```
> CREATE CHANGEFEED FOR TABLE office_dogs, employees INTO 'kafka://localhost:9092';
```
```
        job_id       
+--------------------+
  360645287206223873
(1 row)
```
This will start up the changefeed in the background and return the job_id. The changefeed writes to Kafka.
In a new terminal, move into the extracted confluent-<version> directory and start watching the Kafka topics:
```
$ ./bin/kafka-console-consumer \
--bootstrap-server=localhost:9092 \
--from-beginning \
--whitelist 'office_dogs|employees'
```
```
{"after": {"id": 1, "name": "Petee H"}}
{"after": {"id": 2, "name": "Carl"}}
{"after": {"id": 1, "name": "Lauren", "rowid": 528514320239329281}}
{"after": {"id": 2, "name": "Spencer", "rowid": 528514320239362049}}
```
The initial scan displays the state of the tables as of when the changefeed started (therefore, the initial value of "Petee" is omitted).

Note:

This example only prints the value. To print both the key and value of each message in the changefeed (e.g., to observe what happens with DELETEs), use the --property print.key=true flag.
Back in the SQL client, insert more data:
```
> INSERT INTO office_dogs VALUES (3, 'Ernie');
```
Back in the terminal where you're watching the Kafka topics, the following output has appeared:
```
{"after": {"id": 3, "name": "Ernie"}}
```
When you are done, exit the SQL shell (\q).
To stop cockroach, run:
```
$ cockroach quit --insecure
```
To stop Kafka, move into the extracted confluent-<version> directory and stop Confluent:
```
$ ./bin/confluent stop
```

Create a changefeed connected to Kafka using Avro

Note:

CREATE CHANGEFEED is an enterprise-only feature. For the core version, see the CHANGEFEED FOR example above.

In this example, you'll set up a changefeed for a single-node cluster that is connected to a Kafka sink and emits Avro records. The changefeed will watch two tables.

If you do not already have one, request a trial enterprise license.
Use the cockroach start-single-node command to start a single-node cluster:
```
$ cockroach start-single-node --insecure --listen-addr=localhost --background
```
Download and extract the Confluent Open Source platform (which includes Kafka).
Move into the extracted confluent-<version> directory and start Confluent:
```
$ ./bin/confluent start
```
Only zookeeper, kafka, and schema-registry are needed. To troubleshoot Confluent, see their docs.
Create two Kafka topics:
```
$ ./bin/kafka-topics \
--create \
--zookeeper localhost:2181 \
--replication-factor 1 \
--partitions 1 \
--topic office_dogs
```
```
$ ./bin/kafka-topics \
--create \
--zookeeper localhost:2181 \
--replication-factor 1 \
--partitions 1 \
--topic employees
```
Note:

You are expected to create any Kafka topics with the necessary number of replications and partitions. Topics can be created manually or Kafka brokers can be configured to automatically create topics with a default partition count and replication factor.
As the root user, open the built-in SQL client:
```
$ cockroach sql --insecure
```
Set your organization name and enterprise license key that you received via email:
```
> SET CLUSTER SETTING cluster.organization = '<organization name>';
```
```
> SET CLUSTER SETTING enterprise.license = '<secret>';
```
Enable the kv.rangefeed.enabled cluster setting:
```
> SET CLUSTER SETTING kv.rangefeed.enabled = true;
```
Create a database called cdc_demo:
```
> CREATE DATABASE cdc_demo;
```
Set the database as the default:
```
> SET DATABASE = cdc_demo;
```

Create a table and add data:

> CREATE TABLE office_dogs (
     id INT PRIMARY KEY,
     name STRING);

> INSERT INTO office_dogs VALUES
   (1, 'Petee'),
   (2, 'Carl');

> UPDATE office_dogs SET name = 'Petee H' WHERE id = 1;

Create another table and add data:

> CREATE TABLE employees (
     dog_id INT REFERENCES office_dogs_avro (id),
     employee_name STRING);

> INSERT INTO employees VALUES
   (1, 'Lauren'),
   (2, 'Spencer');

Start the changefeed:

> CREATE CHANGEFEED FOR TABLE office_dogs, employees INTO 'kafka://localhost:9092' WITH format = experimental_avro, confluent_schema_registry = 'http://localhost:8081';

        job_id       
+--------------------+
  360645287206223873
(1 row)

This will start up the changefeed in the background and return the job_id. The changefeed writes to Kafka.

In a new terminal, move into the extracted confluent-<version> directory and start watching the Kafka topics:

$ ./bin/kafka-avro-console-consumer \
--bootstrap-server=localhost:9092 \
--from-beginning \
--whitelist 'office_dogs|employees'

{"after":{"office_dogs":{"id":{"long":1},"name":{"string":"Petee H"}}}}
{"after":{"office_dogs":{"id":{"long":2},"name":{"string":"Carl"}}}}
{"after":{"employees":{"dog_id":{"long":1},"employee_name":{"string":"Lauren"},"rowid":{"long":528537452042682369}}}}
{"after":{"employees":{"dog_id":{"long":2},"employee_name":{"string":"Spencer"},"rowid":{"long":528537452042747905}}}}

The initial scan displays the state of the table as of when the changefeed started (therefore, the initial value of "Petee" is omitted).

Note:

This example only prints the value. To print both the key and value of each message in the changefeed (e.g., to observe what happens with DELETEs), use the --property print.key=true flag.

Back in the SQL client, insert more data:
```
> INSERT INTO office_dogs VALUES (3, 'Ernie');
```
Back in the terminal where you're watching the Kafka topics, the following output has appeared:
```
{"after":{"office_dogs":{"id":{"long":3},"name":{"string":"Ernie"}}}}
```
When you are done, exit the SQL shell (\q).
To stop cockroach, run:
```
$ cockroach quit --insecure
```
To stop Kafka, move into the extracted confluent-<version> directory and stop Confluent:
```
$ ./bin/confluent stop
```

Create a changefeed connected to a cloud storage sink

Note:

CREATE CHANGEFEED is an enterprise-only feature. For the core version, see the CHANGEFEED FOR example above.

Warning:

This is an experimental feature. The interface and output are subject to change.

In this example, you'll set up a changefeed for a single-node cluster that is connected to an AWS S3 sink. The changefeed watches two tables. Note that you can set up changefeeds for any of these cloud storage providers.

If you do not already have one, request a trial enterprise license.
Use the cockroach start-single-node command to start a single-node cluster:
```
$ cockroach start-single-node --insecure --listen-addr=localhost --background
```
As the root user, open the built-in SQL client:
```
$ cockroach sql --insecure
```
Set your organization name and enterprise license key that you received via email:
```
> SET CLUSTER SETTING cluster.organization = '<organization name>';
```
```
> SET CLUSTER SETTING enterprise.license = '<secret>';
```
Enable the kv.rangefeed.enabled cluster setting:
```
> SET CLUSTER SETTING kv.rangefeed.enabled = true;
```
Create a database called cdc_demo:
```
> CREATE DATABASE cdc_demo;
```
Set the database as the default:
```
> SET DATABASE = cdc_demo;
```

Create a table and add data:

> CREATE TABLE office_dogs (
     id INT PRIMARY KEY,
     name STRING);

> INSERT INTO office_dogs VALUES
   (1, 'Petee'),
   (2, 'Carl');

> UPDATE office_dogs SET name = 'Petee H' WHERE id = 1;

Create another table and add data:

> CREATE TABLE employees (
     dog_id INT REFERENCES office_dogs_avro (id),
     employee_name STRING);

> INSERT INTO employees VALUES
   (1, 'Lauren'),
   (2, 'Spencer');

Start the changefeed:

> CREATE CHANGEFEED FOR TABLE office_dogs, employees INTO 'experimental-s3://example-bucket-name/test?AWS_ACCESS_KEY_ID=enter_key-here&AWS_SECRET_ACCESS_KEY=enter_key_here' with updated, resolved='10s';

        job_id       
+--------------------+
  360645287206223873
(1 row)

This will start up the changefeed in the background and return the job_id. The changefeed writes to AWS.

Monitor your changefeed on the Admin UI. For more information, see Changefeeds Dashboard.
When you are done, exit the SQL shell (\q).
To stop cockroach, run:
```
$ cockroach quit --insecure
```

Known limitations

The following are limitations in the current release and will be addressed in the future:

The following are limitations in the v19.2 release and will be addressed in the future:

Changefeeds only work on tables with a single column family (which is the default for new tables).
Changefeeds do not share internal buffers, so each running changefeed will increase total memory usage. To watch multiple tables, we recommend creating a changefeed with a comma-separated list of tables.
Many DDL queries (including TRUNCATE and DROP TABLE) will cause errors on a changefeed watching the affected tables. You will need to start a new changefeed.
Changefeeds cannot be backed up or restored.
Partial or intermittent sink unavailability may impact changefeed stability; however, ordering guarantees will still hold for as long as a changefeed remains active.
Changefeeds cannot be altered. To alter, cancel the changefeed and create a new one with updated settings from where it left off.
Additional target options will be added, including partitions and ranges of primary key rows.
Changefeeds do not pick up data ingested with the IMPORT INTO statement.
Using a cloud storage sink only works with JSON and emits newline-delimited json files.

Cockroach
University

Docs Hub

Change Data Capture (CDC)

What is change data capture?

Enable rangefeeds

Ordering guarantees

Avro schema changes

Schema changes with column backfill

Create a changefeed (Core)

Configure a changefeed (Enterprise)

Create

Pause

Resume

Cancel

Monitor a changefeed

Debug a changefeed

Using logs

Using `SHOW JOBS`

Usage examples

Create a core changefeed

Create a core changefeed using Avro

Create a changefeed connected to Kafka

Create a changefeed connected to Kafka using Avro

Create a changefeed connected to a cloud storage sink

Known limitations

See also

Cockroach University

Docs Hub

Cockroach University

Docs Hub

Change Data Capture (CDC)

What is change data capture?

Enable rangefeeds

Ordering guarantees

Avro schema changes

Schema changes with column backfill

Create a changefeed (Core)

Configure a changefeed (Enterprise)

Create

Pause

Resume

Cancel

Monitor a changefeed

Debug a changefeed

Using logs

Using SHOW JOBS

Usage examples

Create a core changefeed

Create a core changefeed using Avro

Create a changefeed connected to Kafka

Create a changefeed connected to Kafka using Avro

Create a changefeed connected to a cloud storage sink

Known limitations

See also

Cockroach
University

Cockroach
University

Using `SHOW JOBS`