CockroachDB allows you to define table partitions, thus giving you row-level control of how and where your data is stored. Partitioning enables you to reduce latencies and costs and can assist in meeting regulatory requirements for your data.
Table partitioning is an enterprise-only feature. For insight into how to use this feature to get low latency reads and writes in multi-region deployments, see the Geo-Partitioned Replicas and Geo-Partitioned Leaseholders topology patterns.
Why use table partitioning
Table partitioning helps you reduce latency and cost:
- Geo-partitioning allows you to keep user data close to the user, which reduces the distance that the data needs to travel, thereby reducing latency. To geo-partition a table, define location-based partitions while creating a table, create location-specific zone configurations, and apply the zone configurations to the corresponding partitions.
- Archival-partitioning allows you to store infrequently-accessed data on slower and cheaper storage, thereby reducing costs. To archival-partition a table, define frequency-based partitions while creating a table, create frequency-specific zone configurations with appropriate storage devices constraints, and apply the zone configurations to the corresponding partitions.
How it works
Table partitioning involves a combination of CockroachDB features:
Node attributes
To store partitions in specific locations (e.g., geo-partitioning), or on machines with specific attributes (e.g., archival-partitioning), the nodes of your cluster must be started with the relevant flags:
- Use the
--localityflag to assign key-value pairs that describe the location of a node, for example,--locality=region=east,datacenter=us-east-1. - Use the
--attrsflag to specify node capability, which might include specialized hardware or number of cores, for example,--attrs=ram:64gb. - Use the
attrsfield of the--storeflag to specify disk type or capability, for example,--store=path=/mnt/ssd01,attrs=ssd.
For more details about these flags, see the cockroach start documentation.
Enterprise license
You must have a valid enterprise license to use table partitioning features. For details about requesting and setting a trial or full enterprise license, see Enterprise Licensing.
Note that the following features do not work with an expired license:
- Creating new table partitions or adding new zone configurations for partitions
- Changing the partitioning scheme on any table or index
- Changing the zone config for a partition
However, the following features continue to work even with an expired enterprise license:
- Querying a partitioned table (for example,
SELECT foo PARTITION) - Inserting or updating data in a partitioned table
- Dropping a partitioned table
- Unpartitioning a partitioned table
- Making non-partitioning changes to a partitioned table (for example, adding a column/index/foreign key/check constraint)
Table creation
You can define partitions and subpartitions over one or more columns of a table. During table creation, you declare which values belong to each partition in one of two ways:
- List partitioning: Enumerate all possible values for each partition. List partitioning is a good choice when the number of possible values is small. List partitioning is well-suited for geo-partitioning.
- Range partitioning: Specify a contiguous range of values for each partition by specifying lower and upper bounds. Range partitioning is a good choice when the number of possible values is too large to explicitly list out. Range partitioning is well-suited for archival-partitioning.
Partition by list
PARTITION BY LIST lets you map one or more tuples to a partition.
To partition a table by list, use the PARTITION BY LIST syntax while creating the table. While defining a list partition, you can also set the DEFAULT partition that acts as a catch-all if none of the rows match the requirements for the defined partitions.
See Partition by List example below for more details.
Partition by range
PARTITION BY RANGE lets you map ranges of tuples to a partition.
To define a table partition by range, use the PARTITION BY RANGE syntax while creating the table. While defining a range partition, you can use CockroachDB-defined MINVALUE and MAXVALUE parameters to define the lower and upper bounds of the ranges respectively.
NULL is considered less than any other data, which is consistent with our key encoding ordering and ORDER BY behavior.Partition values can be any SQL expression, but it’s only evaluated once. If you create a partition with value < (now() - '1d') on 2017-01-30, it would be contain all values less than 2017-01-29. It would not update the next day, it would continue to contain values less than 2017-01-29.
See Partition by Range example below for more details.
Partition using primary key
The primary key required for partitioning is different from the conventional primary key. To define the primary key for partitioning, prefix the unique identifier(s) in the primary key with all columns you want to partition and subpartition the table on, in the order in which you want to nest your subpartitions.
For instance, consider the database of a global online learning portal that has a table for students of all the courses across the world. If you want to geo-partition the table based on the countries of the students, then the primary key needs to be defined as:
> CREATE TABLE students (
id INT DEFAULT unique_rowid(),
name STRING,
email STRING,
country STRING,
expected_graduation_date DATE,
PRIMARY KEY (country, id));
Primary Key Considerations
- Currently, you cannot change the primary key after you create the table. Provision for all future subpartitions by including those columns in the primary key. In the example of the online learning portal, if you think you might want to subpartition based on
expected_graduation_datein the future, define the primary key as(country, expected_graduation_date, id). - The order in which the columns are defined in the primary key is important. The partitions and subpartitions need to follow that order. In the example of the online learning portal, if you define the primary key as
(country, expected_graduation_date, id), the primary partition is bycountry, and then subpartition is byexpected_graduation_date. You cannot skipcountryand partition byexpected_graduation_date.
Partition using secondary index
The primary key discussed above has two drawbacks:
- It does not enforce that the identifier column is globally unique.
- It does not provide fast lookups on the identifier.
To ensure uniqueness or fast lookups, create a unique, unpartitioned secondary index on the identifier.
Indexes can also be partitioned, but are not required to be.
Define partitions on interleaved tables
For interleaved tables, partitions can be defined only on the root table of the interleave hierarchy, while children are interleaved the same as their parents.
Replication zones
On their own, partitions are inert and simply apply a label to the rows of the table that satisfy the criteria of the defined partitions. Applying functionality to a partition requires creating and applying replication zone to the corresponding partitions.
CockroachDB uses the most granular zone config available. Zone configs that target a partition are considered more granular than those that target a table or index, which in turn are considered more granular than those that target a database.
Querying partitions
Similar to indexes, partitions can improve query performance by limiting the numbers of rows that a query must scan. In the case of geo-partitioned data, partitioning can limit a query scan to data in a specific region.
Filtering on an indexed column
If you filter the query of a partitioned table on a column in the index directly following the partition prefix, the cost-based optimizer creates a query plan that scans each partition in parallel, rather than performing a costly sequential scan of the entire table.
For example, suppose that the tables in the movr database are geo-partitioned by region, and you want to query the users table for information about a specific user.
Here is the CREATE TABLE statement for the users table:
> SHOW CREATE TABLE users;
table_name | create_statement
+------------+-------------------------------------------------------------------------------------+
users | CREATE TABLE users (
| id UUID NOT NULL,
| city VARCHAR NOT NULL,
| name VARCHAR NULL,
| address VARCHAR NULL,
| credit_card VARCHAR NULL,
| CONSTRAINT "primary" PRIMARY KEY (city ASC, id ASC),
| FAMILY "primary" (id, city, name, address, credit_card)
| ) PARTITION BY LIST (city) (
| PARTITION us_west VALUES IN (('seattle'), ('san francisco'), ('los angeles')),
| PARTITION us_east VALUES IN (('new york'), ('boston'), ('washington dc')),
| PARTITION europe_west VALUES IN (('amsterdam'), ('paris'), ('rome'))
| );
| ALTER PARTITION europe_west OF INDEX movr.public.users@primary CONFIGURE ZONE USING
| constraints = '[+region=europe-west1]';
| ALTER PARTITION us_east OF INDEX movr.public.users@primary CONFIGURE ZONE USING
| constraints = '[+region=us-east1]';
| ALTER PARTITION us_west OF INDEX movr.public.users@primary CONFIGURE ZONE USING
| constraints = '[+region=us-west1]'
(1 row)
If you know the user's id, you can filter on the id column:
> SELECT * FROM users WHERE id='00000000-0000-4000-8000-000000000000';
id | city | name | address | credit_card
+--------------------------------------+----------+---------------+----------------------+-------------+
00000000-0000-4000-8000-000000000000 | new york | Robert Murphy | 99176 Anderson Mills | 8885705228
(1 row)
An EXPLAIN statement shows more detail about the cost-based optimizer's plan:
> EXPLAIN SELECT * FROM users WHERE id='00000000-0000-4000-8000-000000000000';
tree | field | description
+------+-------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| distributed | true
| vectorized | false
scan | |
| table | users@primary
| spans | -/"amsterdam" /"amsterdam"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"amsterdam"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"amsterdam\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"boston" /"boston"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"boston"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"boston\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"los angeles" /"los angeles"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"los angeles"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"los angeles\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"new york" /"new york"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"new york"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"new york\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"paris" /"paris"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"paris"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"paris\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"rome" /"rome"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"rome"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"rome\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"san francisco" /"san francisco"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"san francisco"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"san francisco\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"seattle" /"seattle"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"seattle"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"seattle\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"washington dc" /"washington dc"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"washington dc"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"washington dc\x00"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-
| filter | id = '00000000-0000-4000-8000-000000000000'
(6 rows)
Because the id column is in the primary index, directly after the partition prefix (city), the optimal query is constrained by the partitioned values. This means the query scans each partition in parallel for the unique id value.
If you know the set of all possible partitioned values, adding a check constraint to the table's create statement can also improve performance. For example:
> ALTER TABLE users ADD CONSTRAINT check_city CHECK (city IN ('amsterdam','boston','los angeles','new york','paris','rome','san francisco','seattle','washington dc'));
> EXPLAIN SELECT * FROM users WHERE id='00000000-0000-4000-8000-000000000000';
tree | field | description
+------+-------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| distributed | false
| vectorized | false
scan | |
| table | users@primary
| spans | /"amsterdam"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"amsterdam"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"boston"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"boston"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"los angeles"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"los angeles"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"new york"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"new york"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"paris"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"paris"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"rome"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"rome"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"san francisco"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"san francisco"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"seattle"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"seattle"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/# /"washington dc"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"-/"washington dc"/"\x00\x00\x00\x00\x00\x00@\x00\x80\x00\x00\x00\x00\x00\x00\x00"/#
| parallel |
(6 rows)
To see the performance improvement over a query that performs a full table scan, compare these queries to a query with a filter on a column that is not in the index.
Filtering on a non-indexed column
Suppose that you want to query the users table for information about a specific user, but you only know the user's name.
> SELECT * FROM users WHERE name='Robert Murphy';
id | city | name | address | credit_card
+--------------------------------------+----------+---------------+----------------------+-------------+
00000000-0000-4000-8000-000000000000 | new york | Robert Murphy | 99176 Anderson Mills | 8885705228
(1 row)
> EXPLAIN SELECT * FROM users WHERE name='Robert Murphy';
tree | field | description
+------+-------------+------------------------+
| distributed | true
| vectorized | false
scan | |
| table | users@primary
| spans | ALL
| filter | name = 'Robert Murphy'
(6 rows)
The query returns the same result, but because name is not an indexed column, the query performs a full table scan that spans across all partition values.
Filtering on an partitioned column
If you know which partition contains the data that you are querying, using a filter (e.g., a WHERE clause) on the column that is used for the partition can further improve performance by limiting the scan to the specific partition(s) that contain the data that you are querying.
Now suppose that you know the user's name and location. You can query the table with a filter on the user's name and city:
> EXPLAIN SELECT * FROM users WHERE name='Robert Murphy' AND city='new york';
tree | field | description
+------+-------------+-----------------------------------+
| distributed | true
| vectorized | false
scan | |
| table | users@primary
| spans | /"new york"-/"new york"/PrefixEnd
| filter | name = 'Robert Murphy'
(6 rows)
The table returns the same results as before, but at a much lower cost, as the query scan now spans just the new york partition value.
Examples
Define table partitions by list
Consider a global online learning portal, RoachLearn, that has a database containing a table of students across the world. Suppose we have three datacenters: one in the United States, one in Germany, and another in Australia. To reduce latency, we want to keep the students' data closer to their locations:
- We want to keep the data of the students located in the United States and Canada in the United States datacenter.
- We want to keep the data of students located in Germany and Switzerland in the German datacenter.
- We want to keep the data of students located in Australia and New Zealand in the Australian datacenter.
Step 1. Identify the partitioning method
We want to geo-partition the table to keep the students' data closer to their locations. We can achieve this by partitioning on country and using the PARTITION BY LIST syntax.
Step 2. Start each node with its datacenter location specified in the --locality flag
Start 3 nodes in the US datacenter:
$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=us \ --listen-addr=localhost:26257 \ --http-addr=localhost:8080 \ --store=node1 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=us \ --listen-addr=localhost:26258 \ --http-addr=localhost:8081 \ --store=node2 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=us \ --listen-addr=localhost:26259 \ --http-addr=localhost:8082 \ --store=node3 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259Initialize the cluster:
$ cockroach init \ --insecure \ --host=localhost:26257Add 3 nodes in the German datacenter:
$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=de \ --listen-addr=localhost:26260 \ --http-addr=localhost:8083 \ --store=node4 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=de \ --listen-addr=localhost:26261 \ --http-addr=localhost:8084 \ --store=node5 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=de \ --listen-addr=localhost:26262 \ --http-addr=localhost:8085 \ --store=node6 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259Add 3 nodes in the Australian datacenter:
$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=aus \ --listen-addr=localhost:26263 \ --http-addr=localhost:8086 \ --store=node7 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=aus \ --listen-addr=localhost:26264 \ --http-addr=localhost:8087 \ --store=node8 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259$ cockroach start \ --insecure \ --listen-addr=localhost \ --locality=region=aus \ --listen-addr=localhost:26265 \ --http-addr=localhost:8088 \ --store=node9 \ --background \ --join=localhost:26257,localhost:26258,localhost:26259
Step 3. Request and set a trial enterprise license
See Set the Trial or Enterprise License Key.
Step 4. Create the roachlearn database and students table
Open the CockroachDB SQL shell:
$ cockroach sql --insecure --host=localhost:26257Create the database and set it as current:
> CREATE DATABASE roachlearn;> SET DATABASE = roachlearn;Create the table with the appropriate partitions:
> CREATE TABLE students ( id INT DEFAULT unique_rowid(), name STRING, email STRING, country STRING, expected_graduation_date DATE, PRIMARY KEY (country, id)) PARTITION BY LIST (country) ( PARTITION north_america VALUES IN ('CA','US'), PARTITION europe VALUES IN ('DE', 'CH'), PARTITION australia VALUES IN ('AU','NZ'), PARTITION DEFAULT VALUES IN (default) );Alternatively, you can create and partition the table as separate steps:
> CREATE TABLE students ( id INT DEFAULT unique_rowid(), name STRING, email STRING, country STRING, expected_graduation_date DATE, PRIMARY KEY (country, id));> ALTER TABLE students PARTITION BY LIST (country) ( PARTITION north_america VALUES IN ('CA','US'), PARTITION europe VALUES IN ('DE', 'CH'), PARTITION australia VALUES IN ('AU','NZ'), PARTITION DEFAULT VALUES IN (default) );
Step 5. Create and apply corresponding replication zones
To create replication zone and apply them to corresponding partitions, use the ALTER PARTITION ... CONFIGURE ZONE statement:
Create a replication zone for the
north_americapartition and constrain its data to the US datacenter:> ALTER PARTITION north_america OF TABLE students CONFIGURE ZONE USING constraints='[+region=us]';Create a replication zone for the
europepartition and constrain its data to the German datacenter:> ALTER PARTITION europe OF TABLE students CONFIGURE ZONE USING constraints='[+region=de]';Create a replication zone for the
australiapartition and constrain its data to the Australian datacenter:> ALTER PARTITION australia OF TABLE students CONFIGURE ZONE USING constraints='[+region=aus]';After creating these replication zones, you can view them using the
SHOW ZONE CONFIGURATIONstatement:> SHOW ZONE CONFIGURATION FOR PARTITION north_america OF TABLE students;target | raw_config_sql +-------------------------------------------+----------------------------------------------------------------------+ PARTITION north_america OF TABLE students | ALTER PARTITION north_america OF TABLE students CONFIGURE ZONE USING | range_min_bytes = 16777216, | range_max_bytes = 67108864, | gc.ttlseconds = 90000, | num_replicas = 3, | constraints = '[+region=us]', | lease_preferences = '[]' (1 row)
Step 6. Check replica distribution
> SELECT * FROM [SHOW RANGES FROM TABLE roachlearn.students] WHERE "start_key" IS NOT NULL AND "start_key" NOT LIKE '%Prefix%';
You should see the following output:
start_key | end_key | range_id | replicas | lease_holder
+-----------+-----------------+----------+----------+--------------+
/"AU" | /"AU"/PrefixEnd | 35 | {7,8,9} | 8
/"CA" | /"CA"/PrefixEnd | 31 | {1,2,3} | 1
/"CH" | /"CH"/PrefixEnd | 51 | {4,5,6} | 5
/"DE" | /"DE"/PrefixEnd | 53 | {4,5,6} | 5
/"NZ" | /"NZ"/PrefixEnd | 55 | {7,8,9} | 8
/"US" | /"US"/PrefixEnd | 33 | {1,2,3} | 1
(6 rows)
For reference, here's how the nodes map to zones:
| Node IDs | Zone |
|---|---|
| 1-3 | north_america |
| 4-6 | europe |
| 7-9 | australia |
We can see that, after partitioning, the replicas for US and CA-based students are located on nodes 1-3 in north_america, the replicas for DE and CH-based students are located on nodes 4-6 in europe, and the replicas for AU and NZ-based students are located on nodes 7-9 in australia.
Show partitions and zone constraints
To retrieve table partitions, you can use the SHOW PARTITIONS statement:
> SHOW PARTITIONS FROM TABLE students;
database_name | table_name | partition_name | parent_partition | column_names | index_name | partition_value | zone_constraints
+---------------+------------+----------------+------------------+--------------+------------------+-----------------+------------------+
roachlearn | students | north_america | NULL | country | students@primary | ('CA'), ('US') | [+region=us]
roachlearn | students | europe | NULL | country | students@primary | ('DE'), ('CH') | [+region=de]
roachlearn | students | australia | NULL | country | students@primary | ('AU'), ('NZ') | [+region=aus]
roachlearn | students | default | NULL | country | students@primary | (DEFAULT) | NULL
(4 rows)
You can also view partitions by database and index.
In testing, scripting, and other programmatic environments, we recommend querying the crdb_internal.partitions internal table for partition information instead of using the SHOW PARTITIONS statement. For more information, see Querying partitions programmatically.
Define table partitions by range
Suppose we want to store the data of current students on fast and expensive storage devices (e.g., SSD) and store the data of the graduated students on slower, cheaper storage devices (e.g., HDD).
Step 1. Identify the partitioning method
We want to archival-partition the table to keep newer data on faster devices and older data on slower devices. We can achieve this by partitioning the table by date and using the PARTITION BY RANGE syntax.
Step 2. Set the enterprise license
To set the enterprise license, see Set the Trial or Enterprise License Key.
Step 3. Start each node with the appropriate storage device specified in the --store flag
Start the first node:
$ cockroach start --insecure \ --store=path=/mnt/1,attrs=ssd \ --advertise-addr=<node1 hostname> \ --join=<node1 hostname>,<node2 hostname>Start the second node:
$ cockroach start --insecure \ --store=path=/mnt/2,attrs=hdd \ --advertise-addr=<node2 hostname> \ --join=<node1 hostname>,<node2 hostname>Initialize the cluster:
$ cockroach init \ --insecure \ --host=<address of any node>
Step 4. Create a table with the appropriate partitions
> CREATE TABLE students_by_range (
id INT DEFAULT unique_rowid(),
name STRING,
email STRING,
country STRING,
expected_graduation_date DATE,
PRIMARY KEY (expected_graduation_date, id))
PARTITION BY RANGE (expected_graduation_date)
(PARTITION graduated VALUES FROM (MINVALUE) TO ('2017-08-15'),
PARTITION current VALUES FROM ('2017-08-15') TO (MAXVALUE));
Step 5. Create and apply corresponding zone configurations
To create zone configurations and apply them to corresponding partitions, use the ALTER PARTITION ... CONFIGURE ZONE statement:
> ALTER PARTITION current OF TABLE students_by_range
CONFIGURE ZONE USING constraints='[+ssd]';
> ALTER PARTITION graduated OF TABLE students_by_range
CONFIGURE ZONE USING constraints='[+hdd]';
Step 6. Check replica distribution
> SHOW RANGES FROM TABLE students_by_range;
You should see the following output:
start_key | end_key | range_id | replicas | lease_holder | locality
+-----------+---------+----------+----------+--------------+-----------+
NULL | /17393 | 52 | {2,5,8} | 5 | region=de
/17393 | NULL | 53 | {6,7,10} | 6 | region=de
(2 rows)
Define subpartitions on a Table
A list partition can itself be partitioned, forming a subpartition. There is no limit on the number of levels of subpartitioning; that is, list partitions can be infinitely nested.
Going back to RoachLearn's scenario, suppose we want to do all of the following:
- Keep the students' data close to their location.
- Store the current students' data on faster storage devices.
- Store the graduated students' data on slower, cheaper storage devices (example: HDD).
Step 1. Identify the Partitioning method
We want to geo-partition as well as archival-partition the table. We can achieve this by partitioning the table first by location and then by date.
Step 2. Start each node with the appropriate storage device specified in the --store flag
Start a node in the US datacenter:
$ cockroach start \
--insecure \
--advertise-addr=<node1 hostname> \
--locality=datacenter=us1 \
--store=path=/mnt/1,attrs=ssd \
--store=path=/mnt/2,attrs=hdd \
--join=<node1 hostname>,<node2 hostname>
Start a node in the AUS datacenter:
$ cockroach start \
--insecure \
--advertise-addr=<node2 hostname> \
--locality=datacenter=aus1 \
--store=path=/mnt/3,attrs=ssd \
--store=path=/mnt/4,attrs=hdd \
--join=<node1 hostname>,<node2 hostname>
Initialize the cluster:
$ cockroach init --insecure --host=<address of any node>
Step 3. Set the enterprise license
To set the enterprise license, see Set the Trial or Enterprise License Key.
Step 4. Create a table with the appropriate partitions
> CREATE TABLE students (
id INT DEFAULT unique_rowid(),
name STRING,
email STRING,
country STRING,
expected_graduation_date DATE,
PRIMARY KEY (country, expected_graduation_date, id))
PARTITION BY LIST (country)(
PARTITION australia VALUES IN ('AU','NZ') PARTITION BY RANGE (expected_graduation_date)(PARTITION graduated_au VALUES FROM (MINVALUE) TO ('2017-08-15'), PARTITION current_au VALUES FROM ('2017-08-15') TO (MAXVALUE)),
PARTITION north_america VALUES IN ('US','CA') PARTITION BY RANGE (expected_graduation_date)(PARTITION graduated_us VALUES FROM (MINVALUE) TO ('2017-08-15'), PARTITION current_us VALUES FROM ('2017-08-15') TO (MAXVALUE))
);
Subpartition names must be unique within a table. In our example, even though graduated and current are sub-partitions of distinct partitions, they still need to be uniquely named. Hence the names graduated_au, graduated_us, and current_au and current_us.
Step 5. Create and apply corresponding zone configurations
To create zone configurations and apply them to corresponding partitions, use the ALTER PARTITION ... CONFIGURE ZONE statement:
> ALTER PARTITION current_us OF TABLE students
CONFIGURE ZONE USING constraints='[+ssd,+datacenter=us1]';
> ALTER PARTITION graduated_us OF TABLE students CONFIGURE ZONE
USING constraints='[+hdd,+datacenter=us1]';
> ALTER PARTITION current_au OF TABLE students
CONFIGURE ZONE USING constraints='[+ssd,+datacenter=aus1]';
> ALTER PARTITION graduated_au OF TABLE students CONFIGURE ZONE
USING constraints='[+hdd,+datacenter=aus1]';
Step 6. Verify table partitions
> SHOW RANGES FROM TABLE students;
You should see the following output:
+-----------------+-----------------+----------+----------+--------------+
| start_key | end_key | range_id | replicas | lease_holder |
+-----------------+-----------------+----------+----------+--------------+
| NULL | /"AU" | 260 | {1,2,3} | 1 |
| /"AU" | /"AU"/17393 | 268 | {1,2,3} | 1 |
| /"AU"/17393 | /"AU"/PrefixEnd | 266 | {1,2,3} | 1 |
| /"AU"/PrefixEnd | /"CA" | 267 | {1,2,3} | 1 |
| /"CA" | /"CA"/17393 | 265 | {1,2,3} | 1 |
| /"CA"/17393 | /"CA"/PrefixEnd | 261 | {1,2,3} | 1 |
| /"CA"/PrefixEnd | /"NZ" | 262 | {1,2,3} | 3 |
| /"NZ" | /"NZ"/17393 | 284 | {1,2,3} | 3 |
| /"NZ"/17393 | /"NZ"/PrefixEnd | 282 | {1,2,3} | 3 |
| /"NZ"/PrefixEnd | /"US" | 283 | {1,2,3} | 3 |
| /"US" | /"US"/17393 | 281 | {1,2,3} | 3 |
| /"US"/17393 | /"US"/PrefixEnd | 263 | {1,2,3} | 1 |
| /"US"/PrefixEnd | NULL | 264 | {1,2,3} | 1 |
+-----------------+-----------------+----------+----------+--------------+
(13 rows)
Time: 11.586626ms
Repartition a Table
Consider the partitioned table of students of RoachLearn. Suppose the table has been partitioned on range to store the current students on fast and expensive storage devices (example: SSD) and store the data of the graduated students on slower, cheaper storage devices(example: HDD). Now suppose we want to change the date after which the students will be considered current to 2018-08-15. We can achieve this by using the PARTITION BY subcommand of the ALTER TABLE command.
> ALTER TABLE students_by_range PARTITION BY RANGE (expected_graduation_date) (
PARTITION graduated VALUES FROM (MINVALUE) TO ('2018-08-15'),
PARTITION current VALUES FROM ('2018-08-15') TO (MAXVALUE));
Unpartition a Table
You can remove the partitions on a table by using the PARTITION BY NOTHING syntax:
> ALTER TABLE students PARTITION BY NOTHING;
Show the replication zone for a partition
To view the replication zone for a partition, use the SHOW ZONE CONFIGURATION statement.
Locality–resilience tradeoff
There is a tradeoff between making reads/writes fast and surviving failures. Consider a partition with three replicas of roachlearn.students for Australian students.
- If only one replica is pinned to an Australian datacenter, then reads may be fast (via leases follow the workload) but writes will be slow.
- If two replicas are pinned to an Australian datacenter, then reads and writes will be fast (as long as the cross-ocean link has enough bandwidth that the third replica doesn’t fall behind). If those two replicas are in the same datacenter, then the loss of one datacenter can lead to data unavailability, so some deployments may want two separate Australian datacenters.
- If all three replicas are in Australian datacenters, then three Australian datacenters are needed to be resilient to a datacenter loss.
How CockroachDB's partitioning differs from other databases
Other databases use partitioning for three additional use cases: secondary indexes, sharding, and bulk loading/deleting. CockroachDB addresses these use-cases not by using partitioning, but in the following ways:
- Changes to secondary indexes: CockroachDB solves these changes through online schema changes. Online schema changes are a superior feature to partitioning because they require zero-downtime and eliminate the potential for consistency problems.
- Sharding: CockroachDB automatically shards data as a part of its distributed database architecture.
- Bulk Loading & Deleting: CockroachDB does not have a feature that supports this use case as of now.
Known limitations
When defining a table partition, either during table creation or table alteration, it is not possible to use placeholders in the PARTITION BY clause.
See also
Was this helpful?
